API Standard Milling Triangle Bits / Steel Tooth Triangle Bits

Oil and Gas Tricone Rock Bits for Hard RockDescription:1. Elasatomer Sealed Roller Bearing BitCutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.Gauge Structure: Multiple gauge protection with gauge trimmers on the heel and gauge inserts

Featured Products

Oil and Gas Tricone Rock Bits for Hard Rock
API Standard Mill Tooth Tricone Bits / Steel Tooth Tricone Bits

Description:
1. Elasatomer Sealed Roller Bearing Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.
Gauge Structure: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Sealed Bearing Structure: 1. Abrasion resistance and seizure resistance of the bearing are improved. 2. Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 13 5/8", 14 3/4", 15", 15 1/2", 17 1/2", 22", 24", 26", etc.
IADC Code: 1-- Series, 2-- Series, 3- Serie

2. Air Cooling Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit
Gauge Structure: Gauge protection with gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability.
Sealed Bearing Structure: Air cooling roller bearing package. Balls lock the conewhich reduces the probability of cone-dropping to minimum.
Main Type Available: Size: 5 7/8", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 12 1/4", 14 3/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3- Series

3. Non-Sealed Roller Bearing Steel Tooth Bit
Cutting Structure: The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces.
Bearing Structure: Non-sealed roller bearing. Drilling fluid can enter the bearing directly for cooling; Balls lock the cone which reduces the probability of cone Cdropping to minimum
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
IADC Code: 1-- Series, 2-- Series, 3-- Series

4. Metaled sealed Journal Bearing Steel Tooth Bit
Main Type Available: Size: 2 3/8", 3", 3 5/8: ", 3 7/8", 4", 4 1/2", 4 5/8", 4 3/4", 6", 6 1/2", 7 1/2", 7 7/8", 8 1/2", 9 1/2", 9 5/8", 9 7/8", 10 5/8", 12 1/4", 17 1/2", etc.
IADCWOB
(KN/mm)
RPM
(r/min)
Applicable Formations
437/447/4350.35~0.9240~70Very soft formations with low compressive strength and high drillability,
such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc.
517/527/5150.35~1.0220~60Soft formations with low compressive strength and high drillability,
such as mudstone,gypsum,salt,soft limestone, etc.
537/547/535 0.45~1.0220~50Soft to medium formations with low compressive strength, 
such as medium, soft shale, medium soft limestone, 
medium soft sandstone, medium formation with harder and abrasive interbeds, etc.
617/6150.45~1.1200~50Medium hard formation with high compress strength, 
such as hard shale, limestone, sandstone, dolomite. etc
637/635  0.5~1.1180~40Hard formations with high compressive strength, 
such as sandstone, limestone, dolomite ,hard gypsum, marble, etc.
Note: The upper limits of WOB and RPM in above table should not be used simultaneously.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters

Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory

About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.
2. We have advanced technology and equipment.
3. Our technician has more than 13 year's professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours